December 9, 2008 HylaFAX+ Fax Management System for OpenServer 6 =============================================== HylaFAX+ is a fax and paging system for Unix. It supports sending facsimile, receiving facsimile, polled retrieval of facsimile, transparent shared data use of the modem and sending alpha-numeric pages. The software is structured around a client-server architecture. Fax modems may reside on a single machine on a network and clients can submit outbound jobs from any machine that can communicate with the machine on which the modems reside. An access control mechanism is included to control which users on which machines may access a server. REQUIREMENTS: OpenServer 6 with Maintenance Pack 3, DOWNLOAD: ftp://ftp2.sco.com/pub/skunkware/osr6/vols/hylafax-5.2.7Sc-VOLS.cpio INSTALLATION: Download and extract the cpio archive of media images for HylaFAX+ (hylafax-5.2.7Sc-VOLS.cpio) into an empty directory. For example: # cd /u/tmp/hylafax # /bin/cpio -icdvu -I`pwd`/hylafax-5.2.7Sc-VOLS.cpio Using the SCO Software Manager (/etc/custom), select Software -> Install New -> From Select "Media Images" for the Media Device and "Continue" Enter the directory where the HylaFAX+ media images were extracted (in above example, /u/tmp/hylafax) for the Image Directory and press "OK". NOTE: This release of HylaFAX+ for OpenServer 6 is based on source code from the HylaFAX+ project at http://hylafax.sourceforge.net. Previous releases of HylaFAX (tm) for SCO platforms were based on source code from the HylaFAX project at http://www.hylafax.org HylaFAX+ 5.2.7Sc adds threaded support and removes dependencies on the GNU utilities. HylaFAX (tm) is a trademark of Silicon Graphics Corporation. USAGE: The HylaFAX+ 5.2.7 utilities can be found in /usr/bin and /usr/sbin Manual pages for the HylaFAX+ utilities are included. Additional information on HylaFAX+ can be found at http://hylafax.sourceforge.net